There are no products in the cart!
HINO 6x4 FM8JW7A-U
J08E WA 206kW (276HP/PS) - EURO 5
8100 x 2330 x 625 mm
7 boom sections
9700kg
| 1. Brand | |||||
| Model Number | HINO FM8JW7A-U | ||||
| Seating Capacity | 03 | ||||
| Wheel Formula | 6 x 4 (2 axles) | ||||
| 2. Dimensions (mm) | |||||
| Axle Spacing | 5830 x 1350 | ||||
| Overall Dimensions | Length x Width x Height | 11600 x 2490 x 2750 | |||
| Wheel Track | Front / Rear | 2060 / 1855 | |||
| Frame Overhang | Front / Rear | 1280 / 3815 | |||
| 3. Weight (kg) | |||||
| Curb Weight | 7825 | ||||
| Permissible Load Capacity for Cabin Chassis | 15980 | ||||
| Gross Vehicle Weight | 24000 | ||||
| 4. Characteristics | |||||
| Max. Speed (km/h) | 91.73 | ||||
| Min. Turning Radius (m) | 11.3 | ||||
| Max. Gradeability (%) | 42.5 | ||||
| 5. Engine | |||||
| Brand | J08E WA | ||||
| Emission Standard | EURO 5 | ||||
| Engine Type | 4-stroke Diesel, 6 cylinders in-line, liquid-cooled, turbocharged | ||||
| Cylinder Capacity | 7684 cm3 | ||||
| Cylinder Diameter x Piston Stroke | 112 x 130 | ||||
| Max. Power (kW / rpm) | 206 / 2500 | ||||
| Max. Torque (N.m / rpm) | 883 / 1400 – 1600 | ||||
| 6. Drivetrain and Motion System | |||||
| Clutch | Dry friction disc, hydraulic actuation, vacuum assist | ||||
| Gearbox | Mechanical, 09 forward gears – 01 reverse gear, gear ratio: i0 = 5.428 | ||||
| 7. Axles | |||||
| Front Axle | Load Capacity (kg) | 6500 | |||
| Rear Axle | Load Capacity (kg) | 20000 | |||
| Tire Size / Load Capacity / Speed Rating | 11R22.5 / 148 / L | ||||
| 8. Brake System | |||||
| Main Brake System Brake Mechanism Actuation + Control |
Pneumatic, 2-line Drum Pneumatic + Pneumatic |
||||
| Parking Brake System Brake Mechanism Actuation + Control Auxiliary Brake |
Spring-actuated at axle 1 + 2 brake chambers Pneumatic + Pneumatic Exhaust Brake |
||||
| 9. Steering System | |||||
| Type | Recirculating ball | ||||
| Actuation and Power Assist | Mechanical, hydraulic power assist, gear ratio: 20.2 | ||||
| 10. Vehicle Equipment | |||||
| Fuel Tank Capacity (L) | 200 | ||||
| Radio / FM, Air conditioning, 3-point seat belts | Yes | ||||
| Hydraulic jack, vehicle toolkit | Yes | ||||
| Item | Description | Unit | DY SS2037 | ||
|---|---|---|---|---|---|
| Capacity | Max. Lifting Capacity | kg·m | 18,000 | ||
| Max. Working Height | m | 25.6 | |||
| Max. Working Radius | m | 22.6 | |||
| Rated Load | kg / m | 8.000 / 2,0 | |||
| 250 / 22,6 | |||||
| Hydraulic Pump | Rated Oil Flow Volume | Liters / minute | 80 | ||
| Hydraulic Oil Pressure | kg / cm2 | 210 | |||
| Oil Tank Capacity | Liters | 170 | |||
| Boom & Wire Rope | Boom Type / Number of Boom Sections | Hexa / 6 | Hexa / 7 | ||
| Boom Extending Speed | meters / second | 17,8 / 36 | |||
| Boom Swing Speed | degrees / second | 1O – 80O / 18 s | |||
| Wire Rope | Diameter x meters | Ø10 x 100 m | |||
| Winch Speed | meters / minute | 15 / 4 sections | |||
| Swing Angle | Degrees | 360O | |||
| Boom Swing Speed | Revolutions / minute (rpm) | 2.5 | |||
| Overall Dimensions of Crane-mounted Vehicle (L x W x H) mm | 11650 x 2500 x 3580 | ||||
| Dimensions of Cargo Body after Crane Installation (L x W x H) mm | 8100 x 2330 x 625 | ||||
| Specifications according to VN Registration Standard | According to VN Registration Standard | ||||
| Curb Weight after Crane Installation (kg) | 14105 | ||||
| Load Capacity after Crane Installation (kg) | 9700 | ||||
| Designed Gross Weight | 24000 | ||||
| Longitudinal / Transverse Beams of Cargo Body Floor | I150 x 75 x 5 mm | ||||
| Longitudinal Floor Beam Lining | Fabricated Rubber d = 20 mm | ||||
| Transverse Beams | U100 x 45 x 4 mm x 23 pieces | ||||
| Cargo Body Floor Trim | 4 mm thick formed steel | ||||
| Cargo Body Floor | 3.0 mm ribbed flat iron | ||||
| Side Boards | 07 side boards made of 1.5 mm thick formed steel | ||||
| Steel Cargo Body Posts | 6 mm thick U120 mm formed steel | ||||
| Cargo Body U-bolts | M18 mm x 10 sets + 02 anti-collision brackets | ||||
| Fenders | 1 mm thick formed stainless steel | ||||
| Side Protection | 60 x 30 box steel – 03 layers |
| Chassis Reinforcement Plates | V-shaped, 10 mm thick formed steel | ||||
| Rear Outrigger Base according to DONGYANG standard | 01 imported set | ||||
| P.T.O. Power Take-Off | 100% New HINO |
